09/16

Recent progress has been a) making the electrical connections inside the electrical cavity, b) roughing in the galley area, and c) creating the rear cabin cabinet face frame.

Above is a recent state of the wiring progress.  The AC end of the Xantrex is connected to the AC breaker panel located in the left side door.

Above is a view of the galley area showing the counter and lower area structures in place; the entire area has been first-coated with polyurethane.  Below is the left galley area under the counter that will be devoted to the water tank, the pump and the sink.  A shelf above the water tank will provide storage.

 

 The mid-under-galley area is devoted to the full-extension drawer that holds the cooler and spare gas cylinders.

The right side area under the main counter will hold the stove.  The platform assures the  stove will fit front-to-back.  The area under the stove will hold various implements as required.

On the cabin inside rear will be two shelves, located high.  The face frame for these shelves has been created:

The middle horizontal will support a 3/4" birch shelf, while the bottom will support a 1/2" oak plywood shelf.  The fronts will be enclosed via tambours.

The top stringer will attach to the main yoke.  The two shelves will be attached back to the galley partition and trailer sides via cleats.